25 mm Front grip for the Wide Sashes;
Mechanism on the Stay Arm reaches the clutching before 25 mm, during the sash is
changed from tilt opening position to closed position. (see figure 1)

Movement Limitations ;
During the assembling process of middle lock and stay arm, bottom part of stay arm avoids
right - left, up and down movement of the middle lock ( see Figue 3-4)

Extra Screwing;
Like you see in figure (3,4) the Stay Arm binds the Fornax productions and in the same
time it gives the flexibility between them, and gives also the possibility for the Middle lock
to move to 4 directions ( up, down, right and left)

The Corner Connection;
Usable for: Standard, Small, Security Pin, Small Security, Ventilation, Corner Transmission with double pins (see page 30)
By using the standard Corner Transmission, the width will be minimum:395mm.
By using the Small Corner Transmission, the widthmwill be minimum 286mm.

Hinge Connection;
For the upper hinge connection 9-20 mm , 10-20 mm , 13-20 mm , 14-22 mm ,
13-22 mm , (see page 46).

Additional Locking Connecting;
Additional Locking on the Window or Door profile for more grip of the frame and warmer room temperature.

To regular the gasket pressure;
You can change the gasket pressure in a level range of +/- 0,8mm

Assembling;
It helps to easy the installation and save much time.
3,9x25 Rare serrated espagnolette screws code: 449.339.025.001

Coating;
YelkenCoat gives longer durability and corrosion protection to the hardware